Quick Tips to Solve Network Cable is Unplugged Issue
If you see network cable is unplugged error after having a network connection between your computer’s network card and router/switch, then you can try following tips to solve the issue:
You will only encounter this error message if you use wired connection on your network by connecting computer's network card to network router or switch port.
- Check and confirm that you have used the correct network cables (straight or crossover) to establish the connection between computer's network card and network router or switch port. Check here on when to use straight or crossover cable to connect network devices if you are not too sure.
- If the network cable is correct, then you can try to use other network cable and test it. Sometimes the problem can be due to faulty network cable.
- Connect the network cable to other ports of the network router or switch. Sometimes the problem can be due to faulty network port on the network devices.
- If you connect the computer to router, make sure you connect the network cable to router's switch port (but not WAN port).
- Disconnect and reconnect the network cables on both connecting devices to ensure there is no loose connection.
- Ensure the network card driver is installed properly. If not, reinstall it again. Also you can go to manufacturer website to download the latest driver for your network card and install it.
- If you have extra network card, then replace the existing one to test whether it’s network card problem.
- Also you can try to set auto or specific link speed and duplex mode on network card and see whether it works:
10Mbps and Full duplex
100Mbps and Full duplex
1000Mbps and Full duplex
10Mbps and Half duplex
100Mbps and Half duplex
1000Mbps and Half duplex
Auto Detect
Other Articles:
Using Ping to Troubleshoot Network Problem
Connect 2 Computers Directly Using Crossover Cable
Why I cannot access Internet with good wireless signal strength
How to solve limited or no connectivity problem
Return to top of "Quick Tips to Solve Network Cable is Unplugged Issue"!!